The Walkür Deauther Device (WDD) in Version 2.0 is a very powerful tool for the detection of vulnerabilities or security holes in IT networks.
With this device you can easily perform a variety of actions for testing wireless networks via a graphical interface or the built-in OLED display, with your smartphone or your PC.
The main feature, the deauthentication attack (Deauther), is used to disconnect devices from their WiFi network (router), which is often confused with a WiFi jammer.
If you switch on the device and access the Walkuer Deauther Device - WDD 2.0 user interface with your cell phone or smartphone, or control the device via the OLEd display, you can paralyze targeted attacks or attacks that affect all routers or access points in the area/range.

The Deauther WDD 2.0 can be used on the move and does not require an external power supply thanks to its internally installed LiPo battery. Should the battery be exhausted, use of the WDD 2.0 is nevertheless guaranteed. Of course you can also use the WDD during the charging process. For example, with a power bank, laptop or via the socket/power supply.

The WDD is primarily used in W-LAN networks that support the IEEE 802.11 (Wi-Fi) protocol, which is the standard in today's world and is available at all access points.

The WDD sends de-authentication requests to the router and thus logs off all devices connected to the router via W-LAN.
If you activate the deauther and attack a router, no one can connect to the Internet anymore. Many would say it is a W-LAN jammer. But this is not the case. This IT tool is much more powerful than the Deauther, and it is also possible to create any router within reach of cloning/spoofing, or create many new AP\'s (access points), which are then displayed to anyone in the vicinity.
This way it is possible to get other devices to login to the WDD 2.0 without being noticed. Then, in theory, Man-in-the-Middel (MID) would be possible. You are the man in the middle who could read the communication without being noticed.

It is not necessary to know the password of another router. Passwords are not required for attacks.

The range is enormously increased thanks to the built-in 2.4 GHz antenna. The range is 4* higher than before.
They are able to disconnect any connected device automatically and permanently from the wireless LAN network. The other devices connected to the routers can no longer establish an Internet connection.
You don't need access to the router or even a password.
It is also possible to cut off individual devices from the Internet or network.
This device is a powerful tool and extremely easy to use. You don't need any expert knowledge.
It's just like using a simple APP. Our technology does the rest.
The WDD 2.0 has a built-in battery and is therefore mobile and fits in every pocket.

Wi-Fi, hacking, 1A electronics and an elegant design in one.

But please handle this tool/device responsibly and do not use it against others without their permission!

• NEW: Firmware Version 3.0 | harder attack mode
• NEW: External 12 decibel (dBi) antenna to increase the range up to 4 *
• NEW: 0.96 "OLED display
• NEW: Pushbuttons
• NEW: Modular design to increase robustness
• NEW: Magnetic charging socket and LED USB cable
• NEW: RBG status LED

Features:

• Paralyzing all W-LAN networks in the area
• Paralyzing individual routers
• Paralysis of individual devices in the W-LAN network
• SSID spoofing: manipulation & faking of W-LAN hotspots / routers
• Scanning of wireless networks in the area
• Advanced scanning and detection of devices in the area
• 3 different types of attacks
• MAN-IN-THE-MIDDLE attacks possible
• Built-in battery with a service life of 3 hours
• Mobile use
• Simple and user-friendly web interface
• Operation via the web interface with all smartphone models, computer / laptop / Mac / Linux etc.
• Operation directly via the built-in display
• A lot of setting options
• Multilingual: English & German